AT84CS001 Unused inputs and outputs

What do I have to do with the unused inputs and outputs of the AT84CS001 1:2/4 10-bit 2.2 Gsps DMUX?

- CLK, CLKN
If unused, the clock signals should be biased to LVDS low or high for CLK and LVDS high or low for CLKN respectively.

- LVDS Inputs (I0, I0N…I9, I9N, IOR, IORN, DAI, DAIN)
If unused, the LVDS inputs should be biased to LVDS low for the positive signal of the pair and LVDS high for the negative signal of the pair. They can also be left open.

- LVDS Outputs (A0, A0N…A9, A9N, AOR/DRAN, AORN/DRA, B0, B0N…B9, B9N, BOR/DRBN, BORN/DRB, C0, C0N…C9, C9N, COR/DRCN, CORN/DRC, D0, D0N…D9, D9N, DOR/DRDN, DORN/DRD, DR, DRN, DAO, DAON)
The unused LVDS outputs can be left open.

- DIODE
If unused, the DIODE signal should be connected to ground.

- DACTRL
If unused, the DACTRL can be left open or connected to VCCD/2.

- CLKDACTRL
If unused, the CLKDACTRL should be connected to VCCD/2.